Gear test

Double-click / click-chatter test

Find out if your mouse is double clicking by itself. Make 20 deliberate single clicks and BenchRush flags every click that arrives less than 100 ms after the previous one — the typical sign of a worn mouse switch (click chatter).

20 deliberate single clicks

No clicks recorded yet.

How the double click test works

A healthy mouse sends exactly one click per press. A worn switch can bounce and send two clicks a few milliseconds apart, which is why files open when you meant to select them, or drag-and-drop lets go mid-move. A human cannot click twice in under 100 ms on purpose during deliberate single clicks, so BenchRush counts those gaps as suspicious.

  1. Click slowly and deliberately — about one click per second, 20 times.
  2. Read the rapid-repeat count. Zero is clean. One or more means retest.
  3. Test both buttons: right-click problems show up as menus opening and closing at once.

Reading your result

0 rapid repeatsNo chatter detected in this run.
1 rapid repeatPossible chatter. Run the test two or three more times.
2+ rapid repeatsConsistent with a failing switch, especially if it happens again in another browser or computer.

What to do if your mouse double clicks

  • Raise the debounce time in the mouse software if it has that setting; it filters bounces at the cost of a little delay.
  • Rule out software: Windows ClickLock, accessibility tools and macro software can create extra clicks.
  • Use the warranty — switch chatter is a common, recognised fault on many mice.
  • Replace the switch if you are comfortable soldering, or replace the mouse.

More detail: why mice start double-clicking by themselves.

Use the result as a baseline, not a diagnosis

BenchRush measures browser-visible input. If a result looks wrong, repeat the run, check focus and settings, compare another browser/device where practical, and use manufacturer diagnostics for hardware conclusions.

CPS speed run → · View PlayerScore →

Interpret the result

Retest suspicious click chatter methodically

One rapid interval is not a diagnosis. Use deliberate single-click runs, then see whether the pattern follows the mouse across browsers and computers.

Read the guide →

Questions people ask

Does one rapid event mean my mouse is broken?

No. Hand movement, browser timing and accidental double taps can create rapid intervals. Repeated results across multiple careful runs are more informative.

Why use 100 ms?

It is a deliberately strict “very rapid repeat” marker for this browser tool, not a universal hardware debounce specification.

How should I confirm a suspected faulty switch?

Repeat the test with slow intentional clicks, try another browser or computer, and use the manufacturer diagnostic or support process when available.

Can a mouse double click by itself?

Yes. When the metal contact inside a mouse switch wears or oxidises, one press can make and break contact twice. The computer sees two clicks, which is called click chatter or switch bounce.

Will changing the double-click speed in Windows fix it?

No. That setting only decides how fast two intended clicks must be to count as a double-click. A chattering switch still sends the extra click; raising debounce time in mouse software or repairing the switch is what helps.

Privacy by default

Your personal bests, XP and streak are stored locally in this browser. The current tool does not require an account or upload your individual run to a global leaderboard.