Gear benchmark

Mouse polling rate test

Check your mouse polling rate online in 3 seconds. Move the mouse in fast circles and BenchRush reads every position report your browser receives, then shows the rate in Hz — 125, 250, 500, 1000 Hz or higher — and the time between reports.

3-second pointer sample

Press Start, then move the mouse in fast circles inside this box.

—

Ready for a browser event-rate sample.

How to get an accurate polling rate reading

  1. Use Chrome or Edge on a desktop. They expose raw pointer updates, which arrive at the mouse's real report rate. Firefox and Safari group reports per frame, so readings there are less exact.
  2. Move in fast, continuous circles for the full three seconds. A mouse only reports when it moves — slow or stop-start movement lowers the number.
  3. Plug in directly. Front-panel ports, USB hubs and KVM switches can limit high polling rates.
  4. Wake wireless mice first. Many switch to a power-saving rate when idle or when the battery is low.

Polling rate and report interval

125 Hz8 ms between reports. Typical for office mice and many Bluetooth connections.
250 Hz4 ms. Rare today, still found on some budget mice.
500 Hz2 ms. Smooth for everyday use and most games.
1000 Hz1 ms. The common gaming default.
2000–8000 Hz0.5–0.125 ms. High-end gaming mice; needs a strong CPU and a fast display to matter.

Why your mouse shows a lower number than advertised

  • Bluetooth mode — most mice drop to around 125 Hz or less over Bluetooth. Use the 2.4 GHz receiver or a cable.
  • Software setting — the rate is usually changed in the manufacturer's app or with a button underneath the mouse.
  • Browser limits — if the result sits close to your monitor refresh rate (60, 120, 144 Hz), your browser is only delivering one event per frame. The result panel tells you which method was used.
  • System load — a busy CPU or power-saving mode on a laptop can drop reports during the test.

Want the full background? Read mouse polling rate vs browser Hz, or convert any rate with the Hz to milliseconds calculator.

Use the result as a baseline, not a diagnosis

BenchRush measures browser-visible input. If a result looks wrong, repeat the run, check focus and settings, compare another browser/device where practical, and use manufacturer diagnostics for hardware conclusions.

Timing calculator → · View PlayerScore →

Interpret the result

Browser Hz is not raw USB polling

Understand why pointer events can be coalesced or delayed before JavaScript sees them.

Read the guide →

Questions people ask

Is this the same as raw USB polling rate?

No. It is a browser pointer-event rate estimate. Raw USB polling requires lower-level access than a normal web page has.

Why can a 1000 Hz mouse show a lower number?

Browser event coalescing, operating-system scheduling, CPU load, power saving and movement speed can all reduce the event frequency visible to JavaScript.

What is the most useful way to use this test?

Use the same browser and computer and compare repeated runs. It is best as a consistency check and personal baseline.

Is 1000 Hz better than 500 Hz?

A 1000 Hz mouse reports every 1 ms instead of every 2 ms, so cursor movement is slightly smoother and more current. Most people cannot feel the difference outside fast games, and higher rates use a little more CPU.

Does polling rate affect input lag?

Yes, but only by up to the length of one report interval: at most about 8 ms at 125 Hz and 1 ms at 1000 Hz. Display refresh and game frame time usually add much more delay.

How do I change my mouse polling rate?

Open the mouse manufacturer software (for example the gaming app that came with the mouse) or use the polling-rate button on the underside if it has one, then run this test again to confirm.

Privacy by default

Your personal bests, XP and streak are stored locally in this browser. The current tool does not require an account or upload your individual run to a global leaderboard.